- Home /
- Long Gun Storage 4 Post Shelving
Long Gun 4 Post Shelving
50" deep specialty 4 post shelving designed to hold long gun evidence boxes. Optional roll-down security shutter is included in this model.
Family Design
The 4-Post line is designed to be highly flexible and adaptable with every Revit model built to reflect its real world counterparts as closely as possible. Use the prebuilt shelving family to visualize your storage solutions or use the shared sub-component families to build your own custom solution right down to the last shelf.
Our 4-Post shelving incorporates both “L” & “T” shaped uprights allowing for a variety of shelving configurations. All shelf units are assembled without the use of nuts, bolts, or clips and are available for both single entry (wall unit) and double entry (back to back storage) allowing for maximum filing/storage capacity with minimal floor intrusion. Shelves are available slotted to accept adjustable file dividers. All shelf units are designed for expansion and are available as mobile-ready for easy conversion. Our 4-Post units are ready to assemble with no special tools required. Available depths make it an ideal choice for letter, legal, binder, and book storage applications.
Family Parameters:
-
Standard Widths
-
12", 18", 24", 30", 36", 40", 42", 48", 54", 60", 66", 72"
-
SSG Toll Free Number
-
1-800-803-1083
-
Manufacturer
-
Southwest Solutions Group_SPA
-
INFO Lead Time
-
4-6 Weeks
-
Assembly Code
-
E20
-
Keynote
-
10 56 13.16
-
Minimum Width
-
12"
-
Maximum Width
-
72"
-
Standard Depths
-
50"
-
Minimum Depth
-
50"
-
Maximum Depth
-
50"
-
Standard Heights
-
40 1/4", 64 1/4", 76 1/4", 85 1/4", 88 1/4", 97 1/4", 121 1/4", 133 1/4", 143 3/4"
-
Minimum Height
-
40.25"
-
Maximum Height
-
143.75"
-
SSG Author
-
AWright
-
Model
-
4P
-
Family ID
-
30ac7e3a-66d5-4b91-b309-d1318be09284
Family Properties:
-
BIMobject Category
-
Furniture: Shelving & Storage
-
IFC
-
Furniture
-
Includes Pricing
-
Yes
-
ADA Compliant
-
No
-
Has MEP Connectors
-
No
-
Primary Material
-
Powder coated steel
-
BIMobject Category
-
Furniture: Shelving & Storage
-
IFC
-
Furniture
-
Omniclass
-
23-21 11 11 11
Uprights
Formed from steel sheet to a hollow “tee” shape for intermediate supports and formed angles for end supports. Uprights have keyhole slots on inner wall only. Provide with sheet steel panels full height and depth of end uprights. Provide intermediate “tee” uprights between adjacent units.
Shelves and Supports
Formed from sheet steel with flanges on all sides and return hem on front and back flanges. Ends are formed to clear inside of upright offset panels. Shelves are independently adjustable. Shelf supports are formed from heavy gauge steel sheet with four solid steel shoulder rivets, two per ear, that interlock with inner wall of uprights.
Nominal Shelf Dimensions
- Width: 12 inches (305MM) to 72 inches (1829MM) sections used to meet project requirements
- Shelf Edge Vertical Profile: 3/4 inch (19MM) maximum
- Vertical Adjustment Increment: 1-1/2 inches (38MM)
- Width Of Intermediate Uprights: 2 inches (51MM)
- Clearance Between Uprights: Nominal shelf section width minus 2 inches (51MM)
- Levelness of Completed Shelf Units: Maximum 1/8 inch (3.2MM) between bottom shelf and canopy top, measured along the edge of any upright in any direction
Accessories
- File dividers
- Center stops
- Reference shelves
- Back stops
- Laminate end panel
- End panel mounting brackets
- Backs
- Bin dividers
- Bin fronts
Finishes
Paint finish, low pressure laminate, high pressure laminate, or acrylic finish.
