- Home /
- BIM Library /
- Product Types /
- Lockers /
- Metal Lockers /
- Drying Painted Steel Evidence Locker
Family Information
Technical Data
Evidence Drying Cabinet
This evidence locker is specifically designed for the slow drying of blood or other liquids from sensitive evidence. The model includes connections for an air duct to the outside and a 1/2" drain pipe.
Family Design
Each kit comes with a variety of options that each have a unique price attached to them. A typical solution would be a run of lockers in a linear direction.
Lockers
- Lockers come in either Pass-thru or Non Pass-thru
- Each model comes with a variety of compartments and sizes with self-closing doors
- Push-Button locks on the front of each door
- For Pass-thru lockers, a single hinged rear door provides access and cannot be accessed from the front
- Rear door comes with a different master key for evidence retrieval
- No keys required for evidence drop off
- Units come shipped fully assembled
- Pre-drilled mounting holes in base and sides of locker
- Number tags w/ instructions are installed on all front doors
- Base comes with adjustable floor levelers
- High quality Powder coat paint
- Standard trim and installation hardware comes with each locker
- Lifetime warranty
- One year limited warranty on all refrigeration units
- Mesh rear doors available
- Lockers are typically 36" Wide x 82" Tall and 24" Deep w/ base. Some lockers come 24" Wide
- Optional front lock out system
Small Evidence Refrigerator
- Stainless steel throughout
- Keyless locking system prevents re-access
- Available in Pass-thru and Non Pass-thru
- Four standard configurations
Family Parameters:
-
Standard Widths
-
36"
-
Keynote
-
10 51 13
-
SSG Toll Free Number
-
1-800-803-1083
-
Manufacturer
-
Southwest Solutions Group_SPA
-
INFO Lead Time
-
4-6 Weeks
-
Assembly Code
-
E20
-
Minimum Width
-
36"
-
Maximum Width
-
36"
-
Standard Depths
-
24"
-
Minimum Depth
-
24"
-
Maximum Depth
-
24"
-
Standard Heights
-
82"
-
Minimum Height
-
82"
-
Maximum Height
-
82"
-
SSG Author
-
AWright
-
Model
-
DC-1
-
Family ID
-
04d4366c-35dc-4894-931b-ea77000c54e6
Family Properties:
-
Omniclass
-
23-29 15 15 11
-
Product Video
-
https://youtu.be/19mmvPSD3lQ
-
BIMobject Category
-
Furniture: Shelving & Storage
-
IFC
-
Furniture
-
Includes Pricing
-
Yes
-
ADA Compliant
-
No
-
Has MEP Connectors
-
No
-
Primary Material
-
Powder coated steel
-
BIMobject Category
-
Furniture: Shelving & Storage
-
IFC
-
Furniture
Sustainability
- Contain an average of 75% recycled steel
- Can be reconfigured and reused in order to prevent disposal
- All products meet the indoor advantage gold certification
- All excess materials used in the construction process are recycled
Frame
- Structural welded frame constructed of 18 gauge steel
- Horizontal and vertical flanges will overlap a min. of 1.5" and have a min. of 2 resistance welds per corner
- Center vertical lock housing is structural and will run the full height and depth of the locker
- Each base shall be permanently affixed to each locker.
- Each base is constructed of 14 gauge steel
- Four floor levelers come with each base
- Stainless steel push button lock built of one piece removable design.
- Locks will secure the door with a single push of the button
- Locks come pre-lubricated with no maintenance for the lifetime of the unit
- Locks are tested to complete a min. 40,000 cycles without failure
- Each door is constructed of two pieces of 18 gauge steel
- Each door has a nickel plated, flush mounted door handle
- Neoprene silencers
- Anti-pry tabs that engage with the Center Vertical lock
- Spring loaded hinges welded to prevent pin removal
- Has magnetic seals on outer door
- Has circulation fans that maintain a consistent temperature throughout the interior of the fridge
- Digital controls with settings set to maintain 38 to 42 Fahrenheit
- Has an audible alarm
- Condensation free door jam
- Defrost cycle twice a day
- 134A refrigerant
- Powered by 115V/15 amp
- CUL and UL Certified
- 1 year warranty on refrigeration unit and lifetime warranty on frame
