- Home /
- BIM Library /
- All Families /
- Massing Standard High Density Shelving
Massing Standard High Density Shelving
Family Design
The High Density line is designed to be highly flexible and adaptable with every Revit model built to reflect its real world counterparts as closely as possible. Use this large format high-density shelving family to visualize your storage solutions right down to the last shelf.
Our 4-Post shelving incorporates both âLâ & âTâ shaped uprights allowing for a variety of shelving configurations. All shelf units are assembled without the use of nuts, bolts, or clips and are available for both single entry (wall unit) and double entry (back to back storage) allowing for maximum filing/storage capacity with minimal floor intrusion. Shelves are available slotted to accept adjustable file dividers. All shelf units are designed for expansion and are available as mobile-ready for easy conversion. Our 4-Post units are ready to assemble with no special tools required. Available depths make it an ideal choice for letter, legal, binder, and book storage applications.
Family Parameters:
-
Standard Shelf Widths
-
30", 36", 42", 48"
-
SSG Toll Free Number
-
1-800-803-1083
-
Manufacturer
-
Southwest Solutions Group_SPA
-
INFO Lead Time
-
4-6 Weeks
-
Assembly Code
-
E20
-
Keynote
-
10 56 26
-
Standard Shelf Heights
-
76 1/4", 85 1/4", 88 1/4", 97 1/4"
-
Minimum Aisle Space
-
36"
-
Minimum Carriage Depth
-
36"
-
Standard Shelf Depths
-
10", 12", 13", 15", 16", 18", 24"
-
Maximum Carriage Depth
-
360"
-
Minimum Carriage Width
-
12"
-
Maximum Shelf Height
-
97.25"
-
Maximum Carriage Width
-
48"
-
Minimum Shelf Height
-
76.25"
-
SSG Author
-
KBruxvoort
-
Family ID
-
70a67f5b-36f0-4fc4-ad80-6d221225f1a0
Family Properties:
-
Includes Pricing
-
No
-
BIMobject Category
-
Furniture: Shelving & Storage
-
IFC
-
Furniture
-
ADA Compliant
-
No
-
Has MEP Connectors
-
No
-
Primary Material
-
Powder coated steel
-
BIMobject Category
-
Furniture: Shelving & Storage
-
IFC
-
Furniture
-
Omniclass
-
23-21 11 11 11
-
Product Video
-
https://youtu.be/L3_KD5CtWkk
Uprights and Shelves
- 16 gauge cold rolled steel uprights
- Shelves are formed of 22 gauge cold rolled steel with a 3/4" flange on all sides
- Shelves are available plain or with slots punched on 2" centers to accept adjustable dividers
- Shelf supports are formed of 14 gauge hot rolled pickled steel 3/4" high
- Shelf reinforcements are formed of 13 gauge hot rolled, pickled steel and formed into a channel shape, align with respective shelf support
Kick Plate
Kick Plates are formed of 14 or 16 gauge cold rolled steel formed with a stiffener flange on top and bottom edge. Kick Plates are available in 2" and 4" heights.
Sectional Backs
Sectional backs are formed of 20 gauge cold rolled steel, positioned on the inner rear post, and are securely held in place by a formed retainer flange positioned between the shelf support and post. Each back section will include a formed channel on the top and bottom and include punched holes for joining sections together. Backs of 40" high are one-piece, 64" high are two-piece, and up to 97" are of three-piece construction. Sectional back panels will add 3/8" to overall depth of shelving.
Pull Out Reference Shelves
Pull out reference shelves shall be formed of 20 gauge cold rolled steel and attach to underside of shelf supports. Pull out reference shelves operate on full extension ball bearing suspensions and are available to mount on single or double entry shelving.
Finish
All steel parts are thoroughly cleaned using a three-stage iron phosphate washer and then coated with an Epoxy-Hybrid powder coat finish using a state-of-the-art electrostatic paint system. Powder coating is more environmentally friendly than liquid paint and provides a durable uniform finish that is scratch and corrosion resistant.
