- Home /
- BIM Library /
- All Families /
- Art Storage 4-Post Shelving
Family Information
Technical Data
4-Post Art Storage Rack
Closed 4-post shelving unit with vertical rods art/frame support rods.
Family Design
This 4-Post unit has been specially configured for storing art or other flat media. Use the rods in groups of 4 to safely and efficiently store picture frames up to 550 pounds per shelf (actual capacity varies based on selected width and depth). Ideal for use in museums, educational, and corporate settings, this art rack will be sure your precious works are protected. Use ENTER_Width and ENTER_Depth to select overall dimensions. The number of rods will automatically adjust to the necessary number and spacing based on dimensions. All units contain two shelves except for 121" tall racks which come with 3 equally-spaced shelves - additional shelves available on order.
Family Parameters:
-
Standard Widths
-
30", 36", 42", 48"
-
SSG Toll Free Number
-
1-800-803-1083
-
Manufacturer
-
Southwest Solutions Group_DAT
-
INFO Lead Time
-
Contact SSG for info
-
Assembly Code
-
E20
-
Keynote
-
10 56 13
-
Minimum Width
-
30"
-
Maximum Width
-
48"
-
Standard Depths
-
24", 30", 36"
-
Minimum Depth
-
24"
-
Maximum Depth
-
36"
-
Standard Heights
-
76", 88", 97", 121"
-
Minimum Height
-
76"
-
Maximum Height
-
121"
-
SSG Author
-
AWright
-
Model
-
65895
-
Family ID
-
56dc9aab-a8eb-46ca-b954-4f91be315aca
Family Properties:
-
Includes Pricing
-
Yes
-
ADA Compliant
-
No
-
Has MEP Connectors
-
No
-
Primary Material
-
Powder coated steel
-
BIMobject Category
-
Furniture: Shelving & Storage
-
IFC
-
Furniture
-
Omniclass
-
23-21 11 11 11
Uprights
Formed from steel sheet to formed angles for end supports. Uprights have keyhole slots on inner wall only. Provide with sheet steel panels full height and depth of end uprights.
Shelves and Supports
Formed from sheet steel with flanges on all sides and return hem on front and back flanges. Ends are formed to clear inside of upright offset panels. Shelves are independently adjustable. Shelf supports are formed from heavy gauge steel sheet with four solid steel shoulder rivets, two per ear, that interlock with inner wall of uprights.
Nominal Shelf Dimensions
- Shelf Edge Vertical Profile: 3/4 inch (19MM) maximum
- Vertical Adjustment Increment: 1-1/2 inches (38MM)
- Width Of Intermediate Uprights: 2 inches (51MM)
- Clearance Between Uprights: Nominal shelf section width minus 2 inches (51MM)
- Levelness of Completed Shelf Units: Maximum 1/8 inch (3.2MM) between bottom shelf and canopy top, measured along the edge of any upright in any direction
Accessories
- Threaded support rods, used in groups of 4 to support art frames.
Finishes
Paint finish.