- Home /
- BIM Library /
- All Model Groups /
- Evidence Lockers /
- 6 Columns-44 Total Openings Steel Evidence Locker
Family Information
Technical Data
Parts List
Associated Kits/Families
Model Group Design
System Overview
Each kit comes with a variety of options that each have a unique price attached to them. A typical solution would be a run of lockers in a linear direction
Lockers
- Lockers come in either pass-through or non-pass-through
- Each model comes with a variety of compartments and sizes with self-closing doors
- Push-Button locks on the front of each door
- For pass-through lockers, a single hinged rear door provides access and cannot be accessed from the front
- Mesh rear doors available
- Rear door comes with a different master key for evidence retrieval
- No keys required for evidence drop off
- Units come shipped fully assembled
- Pre-drilled mounting holes in base and sides of locker
- Number tags w/ instructions are installed on all front doors
- Base comes with adjustable floor levelers
- High quality powder coat paint
- Standard trim and installation hardware comes with each locker
- Lockers are typically 36" wide x 82" tall x 24" deep with base. Some lockers come 24" wide
- Optional front lock out system
Small Evidence Refrigerator
- Stainless steel throughout
- Keyless locking system prevents re-access
- Available in pass-through and non-pass-through
- Four standard configurations
Model Group Parameters:
-
MODIFY Pass-Thru
-
Yes
-
Family ID
-
bf4902ea-1d9e-48bf-9473-2184bff915e4
Model Group Properties:
-
SMS Part Number
-
SSG-EVL-6_Wide-44_Total_Openings
-
Width
-
14' 0" (168")
-
Depth
-
2' 0" (24")
-
Height
-
6' 10" (82")
-
Includes Pricing
-
Yes
-
ADA Compliant
-
No
-
Has MEP Connectors
-
No
-
Primary Material
-
Powder coated steel
-
BIMobject Category
-
Furniture: Shelving & Storage
-
Omniclass
-
23-29 15 15 11
-
IFC
-
Furniture
Sustainability
- Contain an average of 75% recycled steel
- Can be reconfigured and reused in order to prevent disposal
- All products meet the indoor advantage gold certification
- All excess materials used in the construction process are recylced
Frame
- Structural welded frame constructed of 18 gauge steel
- Horizontal and vertical flanges will overlap a min. of 1.5" and have a min. of 2 resistance welds per corner
- Center vertical lock housing is structural and will run the full height and depth of the locker
Bases
- Each base shall be permanently affixed to each locker
- Each base is constructed of 14 gauge steel
- Four floor levelers come with each base
Locks
- Stainless steel push button lock built of one piece; removable design
- Locks will secure the door with a single push of a button
- Locks come pre-lubricated with no maintenance for the lifetime of the unit
- Locks are tested to complete a min. 40,000 cycles without failure
One Piece Doors
- Each door is constructed of 18 gauge steel
- Each door has a nickel plated, flush mounted door handle
- Neoprene silencers
- Anti-pry tabs that engage with the Center Vertical lock
- Spring loaded hinges welded to prevent pin removal
Refrigerators
- Has magnetic seals on outer door
- Has circulation fans that maintain a consistent temperature throughout the interior
- Digital controls with settings set to maintain 38 to 42 Fahrenheit
- Audible alarm warns when tampered with or if the unit malfunctions
- Condenstaion free door jam
- Defrost cycle twice a day
- 134A refrigerant
- Powered by 115V/15 amp
- CUL and UL Certified
Parts Included
| Category Name | Family Name | Type Name | Quantity |
|---|---|---|---|
| Furniture | SSG_Locker_Evidence_Two-Column_Many_Doors_PCS | 12 Door - 4E, 8F (Config 10) | 2 |
| Furniture | SSG_Locker_Evidence_Two-Column_Narrow_PCS | 6 Door - 2S, 4T (Config 13) | 2 |
| Furniture | SSG_Locker_Evidence_Two-Column_Narrow_PCS | 4 Door - 2P, 2T (Config 12) | 2 |
